Setting Up SA4 via Network

Youtube Video Tutorial: Setting Up SA4 Label Printer via Network 

In Vector, rather than configure the printer to look at LTP or COM, enter the IPaddress:portnumber (The IP address can be set on the printer by following the attached document)

• Related Articles

• Setting Up SA4 Label Printer via Network

  How to Setup a Toshiba SA4 Via the Network

• Printing Zone Labels from Label Printer

  To be able to print zone labels through the label printer, please follow these steps and use the screenshot for guidance: Choose your prefix and number of labels you need, then click generate This will populate the blank box below Next select your ...

• Label Printer Settings for Toshiba SA4

  Please see below the correct settings of the SA4 Toshiba Label printer. Firstly make sure the correct label printer is selected TEC452/SA4 The labels should be selected as the ones highlighted below (2 across (37 by 24mm, 3mm gap)) Also ensure the ...

• Receipt Printer Working but Cash Drawer not Opening

  1. Turn off the receipt printer 2. Turn the receipt printer back on by holding down the power button and feed button at the same time on the front of the receipt printer until it does a print out 3. Once it has done this print out press the feed ...

• Factory Reset Toshiba Label Printer

  Please follow the below steps to factory reset the label printer in the event settings have been changed accidentally or the printer is not working correctly Power the label printer off  Hold down the left and right button whilst switching it on   ...