Youtube Video Tutorial: Setting Up SA4 Label Printer via Network In Vector, rather than configure the printer to look at LTP or COM, enter the IPaddress:portnumber (The IP address can be set on the printer by following the attached document)
1. Turn off the receipt printer 2. Turn the receipt printer back on by holding down the power button and feed button at the same time on the front of the receipt printer until it does a print out 3. Once it has done this print out press the feed ...
How to Statically Assign an IP Address on a P400 Pinpad This new device will need setting up I am going to share some instructions and there is a video of how to do this. In the video it will show you how to input an IP address. We will provide you ...