Receipt Printer Printing Blocks and Random Characters

Is your receipt printer printing similar to the receipt on the right? There is a simple fix that requires changing something known as the baud rate of the printer. Please follow the steps below to sort this issue:

1. Turn off the receipt printer

2. Turn the receipt printer back on by holding down the power button and feed button at the same time on the front of the receipt printer until it does a print out
3. Once it has done this print out press the feed button twice which will produce another print out
4. Once the print out is done press the feed button again once
5. This will produce a final print out which will say 9600

And that's it!

• Related Articles

• Receipt Printer Working but Cash Drawer not Opening

  1. Turn off the receipt printer 2. Turn the receipt printer back on by holding down the power button and feed button at the same time on the front of the receipt printer until it does a print out 3. Once it has done this print out press the feed ...

• Printing Zone Labels from Label Printer

  To be able to print zone labels through the label printer, please follow these steps and use the screenshot for guidance: Choose your prefix and number of labels you need, then click generate This will populate the blank box below Next select your ...

• HP P2055 not printing either from PC or directly on printer

  This requires a NVRAM reset. To do so on your HP P2055 perform the following steps: 1. Turn the product off. 2. Simultaneously press and hold the up arrow and Cancel button 3. Turn on the product. 4. When the message Permanent storage init displays, ...

• Setting Up SA4 via Network

  Youtube Video Tutorial: Setting Up SA4 Label Printer via Network  In Vector, rather than configure the printer to look at LTP or COM, enter the IPaddress:portnumber (The IP address can be set on the printer by following the attached document)

• Factory Reset Toshiba Label Printer

  Please follow the below steps to factory reset the label printer in the event settings have been changed accidentally or the printer is not working correctly Power the label printer off  Hold down the left and right button whilst switching it on   ...